![]() ![]() Lay a 5-foot notched log across the top front part of the shed. Repeat Steps 6 through 8 until the shed is at least 5 feet tall. There should be notches on both the top and bottom sides of each log edge. Each notch must be at least 4 inches deep and must create flat edges at the end of each log. Step 9Ĭut two 6-inch-long notches at the end of each remaining 1 1/2-foot log using the ax. Place the third notched 5-foot log on the rear side of the shed so that the bottom notches on this log overlap the top notches on the left-side and right-side logs. The notches from both logs must meet at the left front corner of the shed. Lay the second notched 5-foot log on the left side of the shed so that the notch from this log overlaps the notch from the 1 1/2-foot log. Place the second notched 1 1/2-foot log on the front side of the shed, laying the log on top of the cinder blocks with the notches facing upward. The notches from both logs must meet at the right front corner of the shed. Lay the first notched 5-foot log on the right side of the shed so that the notch from this log overlaps the notch from the first 1 1/2-foot log. Place the first notched 1 1/2-foot log on the front side of the shed, laying the log on top of the cinder blocks with the notches facing upward. You may also use the crosscut saw to remove any excess material if you are unable to get a reasonably flat surface by using the ax. Each notch must be at least 4 inches deep and must be on the top side of the log these notches will create a flat edge that the other logs will overlap. Use the ax to cut two 6-inch-long notches at one end of each log. ![]() If necessary, you can also use the crosscut saw to remove any excess wood pieces if you are unable to get a reasonably flat surface by using an ax. Cut two 6-inch-long notches at the end of each 5-foot log using the ax.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |